Controlling The Tv - Hitachi VT-M181A Owner's Manual

Advanced Operations (Remote Control of TV)
For example, if you have an RCA television, press TV and 0 at the same time. If this
button combination sends a signal that matches with your TV, the channel will change
on the TV, and you'll know the remote is set to control the television.
If that button combination does not change the TV channel, go through the whole list
of button combinations one by one until you find one that does change your TV channel.
Also, if your brand of TV is not listed in the chart, try all the number buttons. One of
them may work for you.
If the TV channel still doesn't change after going through all the button combinations
listed, it is likely that you will not be able to program this remote control for your TV.
TV Brands
Hitachi
Zenith
Sony
Magnavox
Sanyo
Gold Star 1
Toshiba
Gold Star 2
NEC
RCA
Panasonic
Mitsubishi
JVC
Sharp

Controlling the TV

Once programmed, the VCR's remote control is ready to control the TV.
First press TV to change to the TV function mode, then press the button of the TV
function that you want.
For example, press TV and the CHANNEL up arrow, and the TV station will change to
the next higher station.
Press VCR1 to operate your VCR with the remote again.
Press TV and This Number
1
2
3
4
5
6
7
8
9
0
CHANNEL (up arrow)
CHANNEL (down arrow)
100/ENT
LAST CH
- 34 -