Selecting A Supported Display Mode - Lenovo ThinkVision LT2452pwC User Manual

Table 2-2. OSD functions (continued))
OSD Icon on Submenu
Main Menu
Options
Exit

Selecting a supported display mode

The display mode the monitor uses is controlled by the computer. Therefore, refer to
your computer documentation for details on how to change display modes.
The image size, position and shape might change when the display mode changes.
This is normal and the image can be readjusted using automatic image setup and the
image controls.
Unlike CRT monitors, which require a high refresh rate to minimize flicker, LCD or
Flat Panel technology is inherently flicker-free.
Note: If your system has previously been used with a CRT monitor and is currently
Description
Adjusts menu location on the screen
Menu Position
Default Returns the menu position to the default settings.
· Horizontal: Changes the horizontal position of the OSD.
Custom
· Vertical: Changes the vertical position of the OSD.
· Save
· Cancel
· Reset
Factory Default
Resets monitor to the original factory settings.
Change button repeat rate and menu time-out settings.
Accessibility
Button repeat rate:
or
Select
· Off
· Default
· Slow
Menu time out: Sets the length of time the OSD will
remain active after the last time a button is pressed.
Exit the main menu
configured to a display mode outside the range of this monitor, you may need
to re-attach the CRT monitor temporarily until you have re-configured the
system; preferably to 1920 x 1200 at 60 Hz, which is the Native Resolution
Display mode.
to change.
Chapter 2. Adjusting and using your monitor
Controls and Controls and
Adjustments Adjustments
(Analog) (Digital)
Same as Analog
Same as Analog
2-6