Listening To The Radio; Home Theater Speaker Ez Set-Up - LG HT33S Owner's Manual

HS33S-DP.BGBRLL_ENG 10/20/08

Listening to the radio

Be sure that FM antenna is connected.
1 Turn the power on:
2 Select FM:
3 Select a radio station:
4 To save a radio station:
A preset number will show in the display.
Up to 50 radio stations can be saved.
5 To confirm press:
6 To select a saved station:
Listening to the radio - more you can do
Look for radio stations automatically
Press and hold TUN.-/TUN.+ for more than a second. The tuner will scan auto-
matically and stop when it finds a radio station.
Choose a preset number for a radio station
When storing a radio station, the preset number can be chosen. When this unit
automatically shows a preset number, press PRESET v/V to change it. Press
PROG./MEMO. to save your chosen number.
Delete all the saved stations
Press and hold PROG./MEMO for two seconds. ERASE ALL will flash up on the
display. Press PROG./MEMO to erase all saved radio stations.
Improve poor FM reception
Press PLAY (B) on the remote control. This will change the tuner from stereo to
mono and usually improve the reception.
14
11:26 AM Page 14
ON REMOTE
POWER
FUNCTION
TUN.-/+
PROG/MEMO.
PROG/MEMO.
PRESET v/V
See information about a radio station
The FM tuner is supplied with the RDS (Radio Data System) facility. This shows
information about the radio station being listened to. Press RDS repeatedly to cycle
through the various data types:
PS (Programme Service Name)
The name of the channel will appear in the display
PTY (Programme Type Recognition)
The programme type (e.g. Jazz or News) will appear in the display.
RT (Radio Text)
A text message contains special information from the broadcast station.
This text may scroll across the display.
CT (Time controlled by the channel)
This shows the time and date as broadcast by the station.

Home Theater Speaker ez Set-up

Listen to sound from TV and Digital Device with 2.1ch mode.
Even in power off mode, if you press TVtHT SPK, then power is on
and automatically changed to AUX OPT mode.
1 Connect
the main unit's OPTICAL IN jack
to jack on optical out of your TV (or Digital
.:
Device etc.)
2 Select the AUX OPT function:
To select the AUX OPT directly
3 Listen sound with 2.1ch speaker.:
4 To escape from AUX OPT
ON REMOTE
-
TVt t HT SPK
-
t HT SPK,
TVt
FUNCTION, or INPUT