HP ProLiant BL460c Quickspecs page 2

QuickSpecs
Overview
HP ProLiant BL460c server blade includes:
Processor:
Up to two Intel® Xeon® 5400 Series processors
Up to two Intel® Xeon® 5200 Series processors
Supports up to 2 Dual-Core 3.50 GHz, 1333 MHz FSB -1X6 MB Level 2 cache memory, and up to 2 Quad-3.33
GHz 1333MHz-2x6 MB Level 2 cache memory
Intel 5000P chipset supporting up to a 1333 MHz Front Side Bus
Memory:
Up to 64 GB of memory, supported by (8) slots of PC2-5300 Fully Buffered DIMMs at 667 MHz
NOTE: 64 GB of memory is supported with 80W processors and below. 64 GB of memory is not supported
with 120W processors.
NOTE: Up to three 16 GB (2 x 8 GB) memory option kits or 48 GB of memory is supported with 120W
processors
Supporting low-power memory
Advanced ECC memory support
Supporting memory interleaving (2x1); memory mirroring and online spare capacity.
Storage Controller:
Integrated HP Smart Array E200i RAID controller with 64 MB cache (with optional battery-backed write-cache with an
upgrade to 128 MB cache in standard BTO models. Supports RAID 0,1 in standard BTO models
NOTE: Drive-less model available through CTO for customers not utilizing internal disk drives and attaching
directly to SAN. Please note that this model does not replace any prior model offerings. The feature listed above
is not included in the standard Drive-less configure to order model. However, all configure to order models offer
optional support for small form factor (SFF) hot-plug drive bays, HP Smart Array E200i Controller (with optional
battery-backed write cache), and Internal USB Connector. See Factory Integrated Model section for more
information.
Internal Drive Support:
Up to 2 small form factor (SFF) SAS or SATA hot plug hard disk drives in standard BTO models
NOTE: Drive-less model now available through CTO for customers not utilizing internal disk drives and attaching
directly to SAN. Please note that this model does not replace any prior model offerings. The feature listed above
is not included in the standard Drive-less configure to order model. However, all configure to order models o
optional support for small form factor (SFF) hot-plug drive bays, HP Smart Array E200i Controller (with optional
battery-backed write cache), and Internal USB Connector. See Factory Integrated Model section for more
information.
Network Controller:
Two (2) embedded NC373i Multifunction Gigabit Server Adapters with iSCSI boot, TCP/IP offload engine, and
optional accelerated iSCSI
One (1) additional embedded 10/100 network adapter dedicated to iLO 2 management
NOTE: The Gigabit Ethernet adapters transmit from the server at 2000 Mbps only, full duplex per port. For more
information, see the "Network Controller" item in Standards Features section.
Mezzanine Support:
Two (2) additional I/O expansion slots via mezzanine card.
Supports up to two (2) mezzanine cards
Dual-Port Fibre Channel Mezzanine (4-Gb) options for SAN connectivity (Choice of Emulex or QLogic).
Wide variety of 10GbE and 1GbE network adapter options for additional network ports
QLogic QMH4062 Gigabit Ethernet iSCSI initiator
4X DDR InfiniBand (IB) Mezzanine (20 Gb/s) options for low latency server interconnectivity (based on Mellanox
technology
Internal USB Support:
One (1) internal USB 2.0 connector for security key devices and USB drive keys in standard BTO models
NOTE: Drive-less model now available through CTO for customers not utilizing internal disk drives and attaching
directly to SAN. Please note that this model does not replace any prior model offerings. The feature listed above
DA - 12518 Worldwide QuickSpecs — Version 35 — 4.27.2009
HP ProLiant BL460c Server Blade
Page 2