Configuration Information - Factory Integrated Models - HP ProLiant BL460c Quickspecs

QuickSpecs

Configuration Information - Factory Integrated Models

NOTE: This section lists some of the steps required to configure a Factory Integrated Model. To ensure only valid configurations are
ordered, HP recommends the use of an HP approved configurator. Contact your local sales representative for information on CTO
product offerings and requirements.
NOTE: HP does not allow factory integration of options into standard models listed above.
Configure-to-order server blades must start with a CTO Blade.
NOTE: FIO indicates that this option is a Factory Installable Option.
Step 1: Base Server Blade Configuration (Select a configurable Blade)
Models
Step 2: Choose Required Options (one of the following from each list unless otherwise
noted):
Processors
HP ProLiant BL460c Driveless CTO Blade
Configurable Model ships with:
Two (2) embedded NC373i Multifunction Gigabit Server Adapters plus one (1)
additional 10/100 NIC dedicated to iLO 2 Management
Integrated Lights-Out 2 Standard Blade Edition
For single processor configuration choose:
Quad-Core Processor Option Kits
Intel® Xeon® Processor X5470 (3.33 GHz, 1333 FSB, 120W)Option Kit, FIO
NOTE: If 2 processors are desired, select one 492308-L21 and one 492308-B21.
Intel® Xeon® processor X5460 (3.16 GHz, 1333 FSB, 120 W) Option Kit, FIO
Base
NOTE: If 2 processors are desired, select one 459973-L21 and one 459973-B21.
Intel® Xeon® processor X5450 (3.00 GHz, 1333 FSB, 120 W) Option Kit, FIO
Base
NOTE: If 2 processors are desired, select one 463056-L21 and one 463056-B21.
Intel® Xeon® processor E5450 (3.00 GHz, 1333 FSB, 80 W) Option Kit, FIO Base
NOTE: If 2 processors are desired, select one 459489-L21 and one 459489-B21.
Intel® Xeon® processor E5440 (2.83 GHz, 1333 FSB, 80 W) Option Kit, FIO Base
NOTE: If 2 processors are desired, select one 459490-L21 and one 459490-B21.
Intel® Xeon® processor E5430 (2.66 GHz, 1333 FSB, 80 W) Option Kit, FIO Base
NOTE: If 2 processors are desired, select one 459491-L21 and one 459491-B21.
Intel® Xeon® Processor E5420 (2.50 GHz, 1333 FSB, 80 W) Option Kit, FIO Base
NOTE: If 2 processors are desired, select one 459492-L21 and one 459492-B21.
Intel® Xeon® Processor L5420 (2.50 GHz, 1333 FSB, 50 W, LV) Option Kit, FIO
Base
NOTE: If 2 processors are desired, select one 462876-L21 and one 462876-B21.
Intel® Xeon® processor E5410 (2.33 GHz, 1333 FSB) Option Kit, FIO Base
NOTE: If 2 processors are desired, select one 459493-L21 and one 459493-B21.
Intel® Xeon® Processor L5410 (2.33 GHz, 1333 FSB, 50 W LV), Option Kit, FIO
Base
NOTE: If 2 processors are desired, select one 462877-L21 and one 462877-B21.
Intel® Xeon® processor E5405 (2.00 GHz, 1333 FSB, 80 W) Option Kit, FIO Base
NOTE: If 2 processors are desired, select one 459494-L21 and one 459494-B21.
Dual-Core Processor Option Kits
DA - 12518 Worldwide QuickSpecs — Version 35 — 4.27.2009
HP ProLiant BL460c Server Blade
447707-B21
492308-L21
459973-L21
463056-L21
459489-L21
459490-L21
459491-L21
459492-L21
462876-L21
459493-L21
462877-L21
459494-L21
Page 16