Removing The Bioclip Plug; Checking The Blades - Husqvarna Rider 213 C Operator's Manual

Lawn cutter
Hide thumbs Also See for Rider 213 C:
Table of Contents

Advertisement

Removing the BioClip plug

To change a Combi deck from the BioClip function to a cutting
deck with rear ejection, remove the BioClip plug, which is
located under the unit.
Put the unit in the service position, see Placing in the
service position.
Combi 94
Loosen the knob and the bolts holding the BioClip plug
and remove the plug.
Replace the unit in normal position.
Fit the BioClip plug in the reverse order.
Combi 103
Remove the three screws holding the BioClip plug, and
remove the plug.
Tip: Fit three full-thread screws M8x15 mm in the screw
holes to protect the threads.
Replace the unit in normal position.
Fit the BioClip plug in the reverse order.

Checking the blades

To achieve the best mowing results it is important that the
blades are undamaged and well-sharpened.
Check that the blades' attachment screws are tight.
IMPORTANT INFORMATION Replacing or sharpening the
blades should be conducted by an authorised service
workshop.
The blades should be balanced after sharpening.
Damaged blades should be replaced when hitting obstacles
that result in a breakdown. Let the service centre assess
whether the blade can be sharpened or must be replaced.
24 –
English
Maintenance

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rider 216Rider 216 awd

Table of Contents