Connections To Other Equipment - Hitachi L26D204 Owner's Manual

Connections to other equipment

The exact arrangement you use to interconnect various video and audio components to this unit is dependent on the model and features
of each component. Check the Owner's Manual provided with each component for the location of video and audio inputs and outputs.
To connect the LCD TV/DVD to a VCR
Rear of the unit
To LINE 2 VIDEO/
AUDIO IN
Video/Audio cord (not supplied)
To connect the LCD TV/DVD to a VCR with an S-Video cord
If you connect a VCR with a S-Video cable to the S-VIDEO IN jack on the rear side of the unit, you must also connect the audio cables to
the AUDIO IN jacks on the rear side of the unit.
The S-Video cable only carries the video signal. The audio signal is separate.
NOTE:
• When the S-Video cable and the standard video cable are connected at the same time, the S-Video cable takes precedence.
Rear of the unit
To LINE 1 AUDIO IN
To LINE 1
S-VIDEO IN
S-Video cord (not supplied)
To connect to a DVD player with Component Video Input
You can enjoy a high quality picture by connecting the unit's COMPONENT VIDEO OUT jacks of your DVD player with the
COMPONENT video cables (not supplied).
Rear of the unit
Component video cord (not supplied)
Y Pb Pr
To COMPONENT IN
To LINE 2 AUDIO IN
Audio cord (not supplied)
NOTE:
• Component Video input of the unit are for use with a device which output 480i/1080i interlaced signals and 480p/720p progressive
signals.
32
54H0321A_eng.indd 32 54H0321A_eng.indd 32
To Video/Audio OUT
Audio cord (not supplied)
VCR
VCR
To Audio OUT
To S-Video OUT
To Component OUT
Y
DVD
Pb
Pr
To Audio OUT
5/4/10 3:44:58 PM 5/4/10 3:44:58 PM