Connecting The Monitor - HP L1940T User Manual

Connecting the Monitor

1. Place the monitor in a convenient, well-ventilated location near the computer.
2. Connect one end of the USB hub cable to the USB connector on the rear panel of the computer
(2) or to a USB hub, and the other end to the upstream USB connector on the monitor (1).
Figure 3-5
WARNING!
• Do not disable the power cord grounding plug. The grounding plug is an important safety
feature.
• Plug the power cord into a grounded (earthed) electrical outlet that is easily accessible at
all times.
• Disconnect power from the equipment by unplugging the power cord from the electrical
outlet.
For your safety, do not place anything on power cords or cables. Arrange them so that no
one may accidentally step on or trip over them. Do not pull on a cord or cable. When
unplugging from the electrical outlet, grasp the cord by the plug.
Connecting the USB Hub Cable (not included with monitor)
To reduce the risk of electric shock or damage to the equipment:
Connecting the Monitor 7