Hitachi ALPHA SERIES L32A404 Owner's Manual page 11

Quick Reference Remote Control Buttons and Functions
In addition to controlling all of the functions on your Hitachi LCD TV, the new remote control is designed to operate different
types of compatible HDMI CEC DVD Players. For HDMI CEC details please see page 31.
POWER Button
Press this button to switch the TV set On or Off
standby.
PICTURE MODE Button
Picture mode can be changed each time pressed
in the following sequence.
Dynamic Standard
Game Custom
NUMERIC Buttons
Press these buttons to manually enter the
channel and for numeric entry when navigating
through the OSD menu system.
(-) DASH/SLEEP Button
Press this button to tune a digital channel. Also
press to set your Sleep Timer from 5 minutes to
4 hours.
LAST CHANNEL Button
Press this button to switch between the current
and the last channel viewed.
VOLUME Button
Press up (+) to increase or down (-) to decrease
the audio level of your TV.
ENERGY SAVE Button
Press this button to set Power Consumption
reduction based on three levels (Min, Med, Max).
CLOSED CAPTION (CC) Button
Press to show and change the closed caption
mode.
MENU Button
Accesses the OSD menu system.
EXIT Button
Press this button to exit the OSD menu.
CURSOR PAD/SELECT Buttons
The Cursor PAD is used to navigate through
the OSD and INPUT menu system, The Select
button is used to Set/Activate highlighted menu
items.
CONTROL Buttons
(DVD with CEC)
Control the functions of compatible DVD players
with HDMI-CEC control.
• The TV's remote control sensor is located on the left bottom corner of the TV frame. To control TV functions, please
NOTES
point the remote control directly at the sensor for best results.
• The pause button "II" on the remote control can be used to Freeze the picture on the screen, in case that this button is
pressed by accident, please press it one more time to restore the moving picture.
P.MODE S.MODE
1
Movie
4
7
VOL
E.SAVE
MENU
EXIT
ASPECT Button
Press this button to change picture size.
MTS/SAP ASPECT
SOUND MODE Button
Press this button to change the sound mode.
2 3
MTS/SAP Button
Press to change the audio source on the
5 6
programs that are showing.
8 9
ENTER Button
Press this button to use as a SELECT feature.
0
ENTER
CHANNEL UP/DOWN Buttons
LAST CH Press these buttons to change the channel up
or down.
CH
MUTE
MUTE Button
Press this button to reduce the audio level to
0 and press it again to restore.
CC SLEEP FAV.CH
FAVORITE CHANNEL Button
Press to access Favorite Channel mode.
INPUT
SLEEP Button
Press to set your Sleep Timer from 5 minutes
to 4 hours.
SELECT
INPUT Button
INFO
Press this button to change the input mode.
INFO Button
Shows the input signal status and other
information.
CLU-4591AV
11