Video And Monitor Problems; No Sound From Headphones; If The Screen Is Blank; If The Screen Is Difficult To Read - Dell Dimension 8250 Series Manual

Test the electrical outlet — Ensure that the electrical outlet is working by testing it with another device, such as a lamp.
Enable digital mode — Your speakers do not work if the CD drive is operating in analog mode. To enable digital mode:
1. Click the Start button, click Control Panel, and then click Sounds, Speech, and Audio Devices.
2. Click Sounds and Audio Devices.
3. Click the Hardware tab.
4. Double-click the name of your CD drive.
5. Click the Properties tab.
6. Check the Enable digital CD audio for this CD-ROM device box.
Eliminate possible interference —
Run the speaker diagnostics — Some speaker systems have self- diagnostics. See the speaker documentation for diagnostics instructions.
Reinstall the audio (sound) driver —
Check for interrupt request conflicts —

No sound from headphones

Check the headphone cable connection —
Disable digital mode — Your headphones do not work if the CD drive is operating in digital mode. To disable digital mode:
1. Click the Start button, click Control Panel, and then click Sounds, Speech, and Audio Devices.
2. Click Sounds and Audio Devices.
3. Click the Hardware tab.
4. Double-click the name of your CD drive.
5. Click the Properties tab.
6. Uncheck the Enable digital CD audio for this CD-ROM device box.
Adjust the Windows volume control —
is turned up and that the sound is not muted.

Video and Monitor Problems

If the screen is blank

HINT: See the monitor documentation for troubleshooting procedures.
Check the monitor power light —
is lit or blinking, the monitor has power. If the power light is blinking, press a key on the keyboard or move the mouse.
Check the monitor cable connection —
missing pins.) Ensure that the video cable is connected as shown on the setup diagram for your computer.
Test the electrical outlet — Ensure that the electrical outlet is working by testing it with another device, such as a lamp.
Swap the power cables — Swap the computer and monitor power cables to determine if the power cable is defective.
Test the video extension cable (if used) —
defective.
Test another monitor — If another monitor is available, connect it to the computer.
Check the diagnostic lights — See

If the screen is difficult to read

Check the monitor settings — See the monitor documentation for instructions on adjusting the contrast and brightness, demagnetizing
(degaussing) the monitor, and running the monitor self-test.
Move the subwoofer away from the monitor —
(2 ft) away from the monitor.
Move the monitor away from external power sources —
screen image to appear "shaky." Turn off nearby devices to check for interference.
Rotate the monitor to face a different direction —
Adjust the Windows® display settings —
1. Click the Start button, and then click Control Panel.
2. Click Appearance and Themes.
3. Click Display, and then click the Settings tab.
4. Try different settings for Screen resolution and Color quality.
Restore the recommended settings —
To access help files, see "Finding Help
Back to Contents Page
Turn off nearby fans, fluorescent lights, or halogen lamps to check for interference.
See "Reinstalling Drivers."
See "Resolving Software and Hardware
Ensure that the headphone cable is securely inserted into the headphone connector.
Click or double-click the speaker icon in the lower-right corner of your screen. Ensure that the volume
If the power light is off, firmly press the button to ensure that the monitor is turned on. If the power light
Check the connector for bent or broken pins. (It is normal for monitor cable connectors to have
If you are using a video extension cable and removing the cable solves the problem, the cable is
"Diagnostic Lights."
If your speaker system includes a subwoofer, ensure that the subwoofer is at least 60 cm
Fans, fluorescent lights, halogen lamps, and other electrical devices can cause the
Eliminate sunlight glare, which can cause poor picture quality.
Restore the original resolution and refresh rate settings. See the Tell Me How help file for instructions.
Information."
Incompatibilities."