Speaker Assembly - HP Pavilion Sleekbook 14 Maintenance And Service Manual

3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the keyboard (see
6. Remove the top cover (see
7. Remove the hard drive (see
8. Remove the USB board (see
9. Remove the WLAN (see
10. Remove the system board (see
To remove the fan from the base enclosure:
1. Disconnect the fan cable.
2. Remove the three Phillips screws (1) from the fan (2) and lift up to remove the fan.
Reverse this procedure to install the cooling fan in the base enclosure.

Speaker assembly

Description
Speaker assembly
IMPORTANT:
and replacement.
Before removing the speaker assembly, follow these steps:
1. Shut down the computer.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
Battery on page
Keyboard on page
Top cover on page
Hard drive on page
USB board/Audio jack on page
WLAN module on page
System board on page
Make special note of each screw and screw lock size and location during removal
33).
37).
40).
44).
47).
48).
51).
Component replacement procedures
Spare part number
697918-001
65