Pch Heat Sink - HP Pavilion Sleekbook 14 Maintenance And Service Manual

PCH heat sink

Description
PCH heat sink
IMPORTANT:
and replacement.
Before removing the PCH heat sink, follow these steps:
1. Shut down the computer.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the keyboard (see
6. Remove the top cover (see
7. Remove the hard drive (see
8. Remove the USB board (see
9. Remove the WLAN (see
10. Remove the system board (see
Remove the PCH heat sink:
1. Turn the system board upside down, with the front toward you.
2. Remove the two Phillips screws (1) and lift off the PCH heat sink (2).
Reverse this procedure to install the PCH heat sink onto a replacement system board.
Make special note of each screw and screw lock size and location during removal
Battery on page
Keyboard on page
Top cover on page
Hard drive on page
USB board/Audio jack on page
WLAN module on page
System board on page
33).
37).
40).
44).
47).
48).
51).
Component replacement procedures
Spare part number
699248-001
61