Power Button Board - HP Pavilion Sleekbook 14 Maintenance And Service Manual

Reverse this procedure to install the top cover.

Power button board

Description
Power button board (includes cable)
IMPORTANT:
and replacement.
Before removing the power button board, follow these steps:
1. Shut down the computer.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the keyboard (see
6. Remove the top cover (see
Remove the power button board:
1. Turn the top cover upside down, with the front toward you.
2. Remove the Phillips screw (1) and tape that secure the power button board to the top cover.
3. Release the clips, lift the power button board (2), and carefully slide the power button cable out
from the guides (3) to remove the power button board.
Reverse this procedure to install the power button board.
Make special note of each screw and screw lock size and location during removal
Battery on page
Keyboard on page
Top cover on page
33).
37).
40).
Component replacement procedures
Spare part number
697901-001
43