Standby Mode; Hibernate Mode; Power Management Modes - Dell Latitude C840 User Manual

Power Management
Management Tips
Power Management Modes
Power Options Properties
Management Tips
NOTE: See "Using a Battery" for more information on conserving battery power.
Connect the computer to an electrical outlet when possible because the battery life expectancy is largely determined by the number of times it is
l
charged.
Place the computer in

standby mode

l
To exit a power management mode, press the power button.
l

Power Management Modes

Standby Mode
Standby mode conserves power by turning off the display and the hard drive after a predetermined period of inactivity (a time-out). When the computer exits
standby mode, it returns to the same operating state it was in before entering standby mode.
NOTICE: If your computer loses AC and battery power while in standby mode, it may lose data.
To enter standby mode:
In the Microsoft® Windows® 2000 operating system, click the Start button, click Shutdown, click Standby, and then click OK.
l
In Windows XP, click the Start button, click Turn off computer, and then click Stand by.
or
Depending on how you set the power management options in the
l
Press the power button.
¡
Close the display.
¡
Press .
¡
To exit standby mode, press the power button or open the display depending on how you set the options in the
exit standby mode by pressing a key or touching the touch pad.

Hibernate Mode

Hibernate mode conserves power by copying system data to a reserved area on the hard drive and then completely turning off the computer. When the
computer exits hibernate mode, it returns to the same operating state it was in before entering hibernate mode.
NOTICE: You cannot remove devices or undock your computer while your computer is in hibernate mode.
Your computer enters hibernate mode if the battery charge level becomes critically low.
Depending on how you set the power management options in the
or hibernate mode when you leave the computer unattended for long periods of time.
Advanced
Advanced tab, use one of the following methods to enter hibernate mode:
tab, use one of the following methods:
Advanced tab. You cannot make the computer