Page of 264
Download Table of ContentsContents Print This PagePrint Bookmark

Daikin VRV III-S RXYMQ36 48PVJU Service Manual Page 84

60 hz.
Hide thumbs
SiUS34-907
 Setting by push button switches
The following settings are made by push button switches on PCB.
LED indication
There are the following three setting modes.
 Setting mode 1 (H1P off)
Initial status (when normal) : Also indicates during "abnormal".
 Setting mode 2 (H1P on)
Used to modify the operating status and to set program addresses, etc. Usually used in servicing the system.
 Monitor mode (H1P blinks)
Used to check the program made in Setting mode 2.
 Mode changing procedure
Using the MODE button, the modes can be changed as follows.
Setting mode 2
MODE
H1P
 Mode changing procedure
Press BS1 (MODE button) for more than 5 sec.
Setting item selection (Set)
Press BS3 (RETURN button) one time.
Setting condition
selection (Set)
Press BS3 (RETURN button) one time.
Setting condition
(Contents) display
Press BS3 (RETURN button) one time.
Press BS1 (MODE button) one time.
Test Operation
H1P
h
Push and hold the BS1
(MODE button) for
5 seconds.
Push the BS1(MODE button)
one time.
On
Setting mode 2
H2P
H3P
h
k
BS1
BS2
BS3
BS4
MODE
SET
RETURN
TEST
RESET
(Normal)
Setting mode 1
MODE
Off
H1P
(Set): Select mode with BS2 (SET button) in each selection step.
Setting mode 1
Press BS1(MODE button) one time.
(Initial condition)
Check item selection (Set)
Contents display
H4P
H5P
h
h
BS5
Push the BS1
(MODE button) one time.
Monitor mode
Press BS3 (RETURN button) one time.
Press BS3 (RETURN button) one time.
Press BS1 (MODE button) one time.
Field Setting
H6P
H7P
h
h
(Factory setting)
Monitor mode
MODE
Blinking
H1P
75

Advertising

This manual also for:

R-410a

Comments to this Manuals

Symbols: 0
Latest comments:
  • cp shukla Feb 16, 2016 06:50:
    RXYQ18PAY6 service manual & vrv Fulform