Sound Feedback; Auto Power; Standby Control; Lamp Schedule - Samsung MD40C User Manual

General

Sound Feedback

Auto Power

Standby Control

Lamp Schedule

OSD Display
Power On Adjustment
Temperature Control
- The displayed image may differ depending on the model.
Sound Feedback
Your product gives sound feedback when you use product.
Off
Sound Feedback
This function is enabled by default. The volume can be adjusted or muted.
Off
―
Off
Auto
Auto Power
Off
Enabling this option will automatically power on the product if the power cable is connected.
•
0 sec
Standby Control
77
You can set the screen standby mode to be applied when an input signal is received.
•
•
•
Lamp Schedule
Enables the lamp value to be adjusted to a user-specified value at a specified time in MDC mode.
•
is enabled by default. Turn off
Low Medium High
/ / /
Off / On
Auto
Power-saving mode will activate if no input signals are detected even though a source device is connected to the display.
The message No Signal will appear if no source device is connected.
― Available in
PC / DVI mode.
On
Power-saving mode will activate if no input signals are detected.
Off
The message No Signal will appear if no input signals are detected.
― The
Standby Control option is only enabled when
― If
No Signal is displayed although a source device is connected, check the cable connection.
Off / On
Sound Feedback
or adjust its volume.
Source is set to PC, DVI.
148