Cisco SOHO series Quick Reference Manual page 96

Network Modules for Cisco 3700, 3600 and 2600XM series
Analog Voice Interface Cards
Product
VIC-2FXO-M2
Two-port – FXO Voice
Interface Card with Battery
Reversal and Caller ID
support – for Europe
VIC-2FXO-M3
Two-port – FXO Voice
Interface Card- for
Australia
VIC-2DID
Two-port Direct Inward
Dial voice/fax interface
card
94
Description
The two-port FXO
voice/fax interface card for
Cisco voice/fax network
modules is used to
connect to PBX or key
system, and to provide off-
premise connections in
Europe only. This voice
interface card supports all
features of VIC-2FXO and
in addition Battery
Reversal, Power Denial
and Caller ID.
Modular Router Solutions
Voice & Fax Integration
The two-port FXO
voice/fax interface card for
Cisco voice/fax network
modules is used to
connect to PBX or key
system, and to provide off-
premise connections for
Australia only. This voice
interface card works with
existing phone and fax
equipment to provide
voice and fax services over
IP , and is compatible with
H.323 standard for audio-
and videoconferencing.
Modular Router Solutions
Voice & Fax Integration
Modular Router Solutions
Voice & Fax Integration
Supported Platforms
and Minimum
IOS Versions
3700 series - 12.2(8)T
3660 series – 12.1(2)XH
3640 – 12.1(2)XH
3620 – 12.1(2)XH
2691 – 12.2(8)T1
2600XM series – 12.1(14)
mainline, 12.2(x) mainline
(future), 12.2(8)T1
2650 series – 12.1(3)T
2620 series – 12.1(2)XH
2610 series – 12.1(2)XH
1760 – 12.2(2)XK
1751 – 12.1(5)YB
1721 – Not Available
3700 series - 12.2(8)T
3660 series – 12.1(2)XH
3640 – 12.1(2)XH
3620 – 12.1(2)XH
2691 – 12.2(8)T1
2600XM series – 12.1(14)
mainline, 12.2(x) mainline
(future), 12.2(8)T1
2650 series – 12.1(3)T
2620 series – 12.1(2)XH
2610 series – 12.1(2)XH
1760 – 12.2(2)XK
1751 – 12.1(5)YB
1721 – Not Available
33700 series – 12.2(8)T
3660 series – 12.1(5)XM1
3640 – 12.1(5)XM1
3620 – 12.1(5)XM1
2691 – 12.2(8)T1
2600XM series – 12.2(x)
mainline (future), 12.2(8)T1
2650 series – 12.1(5)XM1
2620 series – 12.1(5)XM1
2610 series –12.1(5)XM1
1760 – 12.2(2)XK
1751 – 12.2(2)XJ
1721 – Not Available
Comments
When used in a Cisco 2600
or 3600 series router,
requires a voice/fax
network module: NM-1V
or NM-2V.
When used in a 1751 or
1760 series router,
requires a DSP module.
Requires an IOS "PLUS"
feature set.
When used in a Cisco 2600
or 3600 series router,
requires a voice/fax
network module: NM-1V
or NM-2V.
When used in a 1751 or
1760 series router,
requires a DSP module.
Requires an IOS "PLUS"
feature set.
When used in a Cisco 2600
or 3600 series router,
requires a voice/fax
network module: NM-1V
or NM-2V.
When used in a 1751 or
1760 series router,
requires a DSP module.
Requires an IOS "PLUS"
feature set.