Closing Lcd Monitor; Viewing Subject Through Viewfinder - Hitachi DZ-MV730A Instruction Manual

CLOSING LCD MONITOR

Before closing the LCD monitor, be sure to reset
it at right angles to the DVD video camera/
recorder.
Replace the LCD monitor on the DVD video
camera/recorder with the LCD screen facing
inward until a click is heard.

VIEWING SUBJECT THROUGH VIEWFINDER

1
Pull out the viewfinder.
2
Turn the diopter control knob to adjust the
focus to suit your eyesight.
:
Note
• If no image appears in viewfinder, refer to "Check 6"
on page 159.
• If the LCD monitor is opened approximately 90º, the
viewfinder will be off: Turn the open LCD monitor 180º
so that it faces the same direction as the lens; the
image will appear in the viewfinder.
• Focusing will not be correct unless the viewfinder is
pulled out.
• See "LCD/EVF Setup" (on page 98) if you wish to
display images in the viewfinder regardless of
whether you open or close the LCD monitor.
36
:
Note
• Be sure to return the LCD monitor at right angles to
the DVD video camera/recorder before closing it or
replacing it on the DVD video camera/recorder with its
screen facing outside. If the LCD monitor is tilted, it
cannot be closed to the DVD video camera/recorder.
• If the LCD monitor is not securely locked to the DVD
video camera/recorder, no image will appear in the
viewfinder.
Diopter control
Viewfinder
Pull out the viewfinder
until a click is heard.