Casio DT-X5 Series Hardware Manual page 14

Table 1.5 Names of parts
No. Part Name
1 IR port
2 Terminal detect switch
3 Power contacts
4 Fall protector
5 Power indicator lamp
6 Communication
indicator lamp
7 System status indicator
lamp
8 Desktop unit
9 DIP switches
(HA-A61IO only)
10 Power switch
11 Wall mount unit
fastening plate
12 AC adaptor jack
13 RS-422 port
(HA-A61IO only)
14 RS-232C port
(HA-A61IO only)
15 USB port
This port transfers data with the terminal IR port non-contact
communication.
This switch detects when the terminal is not seated correctly on the Cradle.
Power is supplied to the terminal via these contacts.
This is a removal attachment that prevents the terminal from tipping over
and falling.
This lamp indicates the mounting status of the terminal.
Off : Power off
Green : Power on, the terminal mounted correctly
Red : Power on, the terminal not mounted
This lamp shows when the terminal is performing communication.
Off : No communication being performed
Green flashing : Communication in progress
Red : Problem with a connection between two Bridge Satellite
Cradles
This lamp indicates whether the system is operating normally. Regardless of
whether or not the terminal is mounted this lamp indicates the system status
and whether or not a communication operation with the system can be
performed.
Off : System is not operating.
Green : System is operating.
This is the base when using the Cradle in a desktop configuration. Remove
the desktop unit in the case of a wall mount configuration.
Use these switches to configure the Bridge Satellite Cradle as required.
Turns the power on and off.
The holes in this plate accept screws that secure the wall mount unit in place.
Connect the AC adaptor here sold separately to supply power.
This port is used when connecting to another Bridge Satellite Cradle.
This port accepts connection of an RS-232C cable for connection to a
computer for transfer of system data and file data. Use of the RS-232C port
requires installation of a special driver on the PC.
This port accepts connection of a USB cable for connection to a computer
for transfer of system data and file data. Use of the USB port requires
installation of a special driver on the PC.
14
Description