Casio DT-X5 Series Hardware Manual page 11

Table 1.4 Names of parts
No. Name
1 Indicator 1
2 Indicator 2
3 LCD panel
4 Power key
5 L key
6 R key
7 Cursor key
8 Multi key
9 Numeric keys
10 ENT key
11 Function keys
12 IR port
13 Power contacts
14 CLR key
15 Fn key
16 Battery pack cover
lock switches
17 R Trigger key
18 L Trigger key
19 Wrist strap hook
20 Reset switch
21 Battery pack cover
22 Bar code reader port
23 Buzzer
24 Maintenance
connector cover
This indicator is green when charging is completed, and red during charging.
This indicator is green when the bar code has been read successfully, and red
when a reading error has occurred.
Displays text, operating instructions and so forth.
Switches the power on and off (press for about one second).
This is pressed to move the cursor to the left.
This is pressed to move the cursor to the right.
This functions in mainly the same manner as the cursor keys on a PC. It is
used when selecting items or scrolling the screen up and down and so on.
This can be set to perform arbitrary functions.
These are pressed to input numbers and letters.
This is pressed after entering a value or when advancing to the next step.
These keys can be assigned functions other than the functions for reading bar
codes. They are initially assigned the following default settings.
F1 : Deletes one characters to the left.
F2 : Inputs a hyphen (-).
F3 : Inputs a period (.).
F4 : Toggles to switch between numbers and alphabets (uppercase).
F5 : Inputs a space.
F6 : Functions similar to the Tab key on a PC. Used to move items for
input or selection.
F7 : Functions similar to the Tab key on a PC. Used to move items for
input or selection (but moves the opposite to F6.)
F8 : Not set.
This port is used for IR communication with another terminal or the Bridge
Satellite Cradle.
Contact points for supplying power from the Bridge Satellite Cradle and
Cradle-type Battery Charger.
This is pressed to clear the contents of all key inputs.
This is used to make various settings or start up preliminary registered
applications by pressing in combination with a function key or numeric key.
Fn and 1 keys : Switches the backlight on and off.
Fn and 2 keys : Darkens the contrast.
Fn and 3 keys : Lightens the contrast.
Slide these switches when opening and closing the battery cover.
This key is used to read bar codes. It is also pressed when performing a full
reset.
This key is used to read bar codes. It is also pressed when canceling a full
reset.
This is used when attaching the wrist strap.
This is pressed to reset the terminal.
Covers the compartment that holds the battery pack or AA size alkaline
batteries.
Laser light is emitted from this port to read bar codes (Laser scanner
integrated models only).
LED lights are emitted from this port to read bar codes and stacked 2D codes
(C-MOS integrated models only).
Produces a buzzer tone.
This is used when performing maintenance and repairs. This cover should
normally not be opened.
11
Description