How To Select Channels - Hitachi 27AX4B, 27AX3B, 27AX0B Operating Manual

HOW TO SELECT CHANNELS

HOW TO SELECT CHANNELS
Push the POWER BUTTON to turn the set ON. (To turn the set OFF, push the POWER
BUTTON again.)
Push the right side (
the left side (
Variation of the volume is displayed in the lower part of the screen by the color bar. (Fig.
1)
Every time the AVX BUTTON is pressed, the set alternates between the TV mode and
and AVX mode. To watch the TV, set to the TV mode. At this time, the channel number
is displayed in the upper right of the screen. To enjoy a VCR, set to the VIDEO mode.
See page 14.
Channel selection may be performed by pressing either the CHANNEL BUTTON UP
) or DOWN (
(
the next higher channel is selected. When pressing the left side (
CHANNEL BUTTON, the next lower channel is selected. The No. of the channel to
which the TV is tuned is displayed in the upper right of the screen. (Fig. 2)
The channel No. selected is displayed for approx. 8 seconds after changing channels
and disappears automatically.
(When the set is turned ON, the channel No. is displayed on the screen for approx. 15
seconds.)
TURNING THE SET ON - POWER BUTTON
VOLUME CONTROL - VOLUME CONTROL
: UP ) of the VOLUME BUTTON to make the sound louder, and
: DOWN ) of the VOLUME BUTTON to make the sound softer.
FUNCTION SELECTION - AVX BUTTON
CHANNEL SELECTION - CHANNEL BUTTON
). When pressing the right side ( : UP ) of the CHANNEL BUTTON,
: DOWN ) of the