Honda GX120 Owner's Manual page 7

Engine for rammer-type compactors
Hide thumbs Also See for GX120:
Table of Contents

Advertisement

Available languages

Available languages

Oil Change
Drain the used oil when the engine is warm. Warm oil drains
quickly and completely.
1.
Place a suitable container below the engine to catch the used oil,
then remove the oil filler cap/dipstick, oil drain plug and washer.
2.
Allow the used oil to drain completely, then reinstall the oil
drain plug and a new washer, and tighten the oil drain plug
securely.
Please dispose of used motor oil in a manner that is compatible
with the environment. We suggest you take used oil in a sealed
container to your local recycling center or service station for
reclamation. Do not throw it in the trash, pour it on the ground,
or pour it down a drain.
3.
With the engine in a level position, fill with the recommended oil
(see page ) to the upper limit mark (bottom edge of the oil fill
6
hole) on the dipstick.
Running the engine with a low oil level can cause engine
damage. This type of damage is not covered by the Distributor’s
Limited Warranty.
4.
Install the oil filler cap/dipstick and tighten securely.
OIL FILLER CAP/DIPSTICK
WASHER
UPPER LIMIT
DRAIN PLUG
Page 7

Hide quick links:

Advertisement

Chapters

Table of Contents
loading

This manual is also suitable for:

Gx160160

Table of Contents