Table of Contents
Advertisement
When you enter waypoints, they appear
on the map screen as small red flags
numbered 1-5.
Adding Waypoints
From the Change route by screen, if
you say or select Search Places on
Route, then the Select a search
method screen is displayed. Select
either Places Along the Route or
Places Around the Destination.
Driving to Your Destination
Next, select your "Waypoint Category,"
then follow the menu prompts to select a
destination. When the system performs
a search from Places Along the
Route, it displays matches that lie
within a corridor on either side and in
front of you, along your route. From
Places Around the Destination, the
system displays matches in a spiral
pattern outward from the destination.
The search "corridor" distance value
can be changed in Edit Waypoint
Search Area in Setup (see page 88).
To add another waypoint, press the
MENU button and repeat the procedure.
If Search Places on Route is grayed
out, the maximum of 5 waypoints has
been entered.
NOTE:
The system does not allow you to select
the roads you want to use to get to a
destination. However, after you enter a
destination, you can select intersections
or POI "waypoints" that the system will
use to "tailor" your route.
Navigation System
63
Advertisement
Table of Contents
