Key_Algo_Not_Supported. (Id: 04700055); Unsupported_Pubkey_Algo (Id: 04700057); Max_Ssh_Clients_Reached (Id: 04700060) - D-Link NetDefend DFL-210 Log Reference Manual

2.40.14. key_algo_not_supported. (ID:
04700055)
Parameters

2.40.14. key_algo_not_supported. (ID: 04700055)

Default Severity
Log Message
Explanation
Gateway Action
Recommended Action
Revision
Parameters

2.40.15. unsupported_pubkey_algo (ID: 04700057)

Default Severity
Log Message
Explanation
Gateway Action
Recommended Action
Revision
Parameters

2.40.16. max_ssh_clients_reached (ID: 04700060)

Default Severity
Log Message
Explanation
Gateway Action
Recommended Action
Revision
client
ERROR
The authentication algorithm type <keytype> is not supported. Client
<client>
The authentication algorithm that the client uses is not supported.
Closing connection.
close
None.
1
keytype
client
NOTICE
Public Key Authentication Algorithm <authalgo> from client <client>
not supported/enabled.
The client is trying to authenticate using a Public Key Algorithm
which is either not supported or not enabled.
close
If the algorithm is supported by unit, configure the unit to make use of
it.
1
authalgo
client
WARNING
Maximum number of connected SSH clients (<maxclients>) has been
reached. Denying acces for client: <client>.
The maximum number of simultaneously connected SSH clients has
been reached. Denying access for this attempt, and closing the
connection.
close
None.
1
407
Chapter 2. Log Message Reference