Hitachi VM-6400A Instruction Manual page 35

Hitachi camcorder user manual
Hide thumbs Also See for VM-6400A:
Table of Contents

Advertisement

Viewfinder brightness can be adjusted by turning the "BRIGHT"
control. This does not affect the picture actually
recorded by the camcorder.
Attach the shoulder strap (provided). as illustrated.
Your camcorder is a highly sophisticated instrument
It has been carefully checked and adjusted at the factory
under the most rigid quality control and inspection systems. However, should problems develop, check the
following points and take necessary corrective measures.
INSERTING OR REMOVING THE CASSETTE
Symptom
Check Point & Correction
3assette holder cannot be opened when you press
Connect the power source.
'STOP/EJECT'L
3assette cannot be inserted into cassette compartment.
Load cassette in direction indicated by arrow on
cassette
Cassette window must be toward outside
;AMERA RECORDING
Symptom
3heck Point & Correction
_icture does not appear in the viewfinder.
Remove the lens cap.
' Set "CAM/OFFNIDEO"
to "CAM" position.
]'he camcorder can not go into the
' The cassette has had the erase prevention tab removed. Stick a
"ecording mode, even when
)iece of cellophane tape over the erase prevention hole or select a
'REC/PAUSE"
is pressed,
tifferent cassette.
' Set "CAM/OFFNIDEO"
to "CAM" position.
_icture is out of focus.
\uto-focus does not operate if the wide angle or telephoto lens is
_,uto-focus does not operate.
_ttached.
BATTERY CONDITION

Advertisement

Table of Contents
loading

This manual is also suitable for:

Vm-7400a

Table of Contents