Sslsettings - D-Link NetDefend DFL-210 Cli Reference Manual

3.55.20. SSLSettings

Transp_CAMSize_Dynamic
Transp_CAMSize
Transp_L3CSize_Dynamic
Transp_L3CSize
Transp_RelaySTP
Transp_RelayMPLS
RFO_GratuitousARPOnFail
Transparency_ATSExpire
Transparency_ATSSize
NullEnetSender
BroadcastEnetSender
MulticastEnetSender
3.55.20. SSLSettings
Description
Settings related to SSL (Secure Sockets Layer).
Properties
SSL_ProcessingPriority
TLS_RSA_WITH_3DES_168_S
HA1
TLS_RSA_WITH_RC4_128_SH
A1
TLS_RSA_WITH_RC4_128_MD
5
Note
This object type does not have an identifier and is identified by the name of the type
only. There can only be one instance of this type.
Allocate the CAM Size value dynamically. (Default: Yes)
Maximum number of entries in each CAM table. (Default:
8192)
Allocate the L3 Cache Size value dynamically. (Default: Yes)
Maximum number of entries in each Layer 3 Cache. (Default:
8192)
Relay Spanning-Tree (STP, RSTP and MSTP) Bridge Pro-
tocol Data Units to all switch interfaces. (Default: Drop)
Forward MPLS packets to all switch interfaces. (Default:
Drop)
Send gratuitous ARP on failover to alert hosts about changed
interface ethernet and IP addresses. (Default: Yes)
Lifetime of an unanswered ATS entry in seconds. (Default: 3)
Number of ATS entries, total. (Default: 4096)
Action to take if sender MAC in the ethernet header is the
null address (0000:0000:0000). (Default: DropLog)
Action to take if sender MAC in the ethernet header is the
broadcast ethernet address (FFFF:FFFF:FFFF). (Default:
DropLog)
Action to take if sender MAC in the ethernet header is a mul-
ticast ethernet address. (Default: DropLog)
The amount of of CPU time that SSL processing is allowed to
use. (Default: Normal)
Enable cipher RSA_WITH_3DES_168_SHA1. (Default:
Yes)
Enable cipher RSA_WITH_RC4_128_SHA1. (Default: Yes)
Enable cipher TLS_RSA_WITH_RC4_128_MD5. (Default:
Yes)
200
Chapter 3. Configuration Reference