Serviceipproto; Servicetcpudp - D-Link NetDefend DFL-210 Cli Reference Manual

3.54.3. ServiceIPProto

EchoReplyCodes
SourceQuenching
SourceQuenchingCodes
TimeExceeded
TimeExceededCodes
PassICMPReturn
ALG
MaxSessions
Comments
3.54.3. ServiceIPProto
Description
An IP Protocol Service is a definition of an IP protocol with specific parameters.
Properties
Name
IPProto
PassICMPReturn
ALG
MaxSessions
Comments

3.54.4. ServiceTCPUDP

Description
A TCP/UDP Service is a definition of an TCP or UDP protocol with specific parameters.
Specifies which Echo Reply message codes should be
matched. (Default: 0-255)
Enable matching of Source Quenching messages. (Default:
No)
Specifies which Source Quenching message codes should be
matched. (Default: 0-255)
Enable matching of Time Exceeded messages. (Default: No)
Specifies which Time Exceeded message codes should be
matched. (Default: 0-255)
Enable passing an ICMP error message only if it is related to
an existing connection using this service. (Default: No)
An Application Layer Gateway (ALG), capable of managing
advanced protocols, can be specified for this service.
(Optional)
Specifies how many concurrent sessions that are permitted
using this service. (Default: 200)
Text describing the current object. (Optional)
Specifies a symbolic name for the service. (Identifier)
IP protocol number or range, e.g. "1-4,7" will match the protocols ICMP,
IGMP, GGP, IP-in-IP and CBT. (Default: 0-255)
Enable passing an ICMP error message only if it is related to an existing
connection using this service. (Default: No)
An Application Layer Gateway (ALG), capable of managing advanced pro-
tocols, can be specified for this service. (Optional)
Specifies how many concurrent sessions that are permitted using this ser-
vice. (Default: 200)
Text describing the current object. (Optional)
184
Chapter 3. Configuration Reference