Logreceiver; Eventreceiversnmp2C - D-Link NetDefend DFL-210 Cli Reference Manual

3.38. LogReceiver

3.38. LogReceiver
This is a category that groups the following object types.

3.38.1. EventReceiverSNMP2c

Description
A SNMP2c event receiver is used to receive SNMP events from the system.
Properties
Name
IPAddress
Port
Community
RepeatCount
LogSeverity
RoutingTable
Comments
3.38.1.1. LogReceiverMessageException
Description
A log message exception is used to override the severity filter in the log receiver.
Properties
LogCategory
LogID
LogType
LogSeverity
Comments
Specifies a symbolic name for the log receiver. (Identifier)
Destination IP address.
Destination port. (Default: 162)
Community string. (Default: public)
Repetition counter. (Default: 0)
Specifies with what severity log events will be sent to the specified log receiv-
ers. (Optional; Default: Emergency,Alert,Critical,Error,Warning,Notice,Info)
Specifies the routing table the clients host route should be added to. (Default:
main)
Text describing the current object. (Optional)
The Category of the log message.
The ID number of the log message, a empty value selects all messages of this
category. (Optional)
EXCLUDE or INCLUDE. (Default: EXCLUDE)
Specifies with what severity log events will be sent to the specified log receiv-
ers. (Default: Default)
Text describing the current object. (Optional)
Note
If no Index is specified when creating an instance of this type, the object will be
placed last in the list and the Index will be equal to the length of the list.
Chapter 3. Configuration Reference
155