Linkmonitor - D-Link NetDefend DFL-210 Cli Reference Manual

3.36. LinkMonitor

3.36. LinkMonitor
Description
The Link Monitor allows the system to monitor one or more hosts and take action if they are un-
reachable.
Properties
Action
Addresses
MaxLoss
PingInterval
InitGracePeriod
RoutingTable
UseSharedIP
Comments
Specifies what action the system should take.
Specifies the addresses that should be monitored.
A single host is considered unreachable if this number of consecutive
ping responses to that host are not replied to. (Default: 7)
Milliseconds between each monitor attempt. (Default: 250)
Do not allow triggering of the link monitor for this number of seconds
after the last reconfiguration. (Default: 45)
Routing table used for link monitoring. (Default: main)
Use the shared IP of a HA cluster instead of the private IP of the node.
(Default: No)
Text describing the current object. (Optional)
Note
If no Index is specified when creating an instance of this type, the object will be
placed last in the list and the Index will be equal to the length of the list.
Chapter 3. Configuration Reference
153