Ipsecalgorithms - D-Link NetDefend DFL-210 Cli Reference Manual

3.33. IPsecAlgorithms

3.33. IPsecAlgorithms
Description
Configure algorithms which are used in the IPsec phase of an IPsec session.
Properties
Name
NULLEnabled
DESEnabled
DES3Enabled
AESEnabled
BlowfishEnabled
TwofishEnabled
CAST128Enabled
SDT2Enabled
BlowfishMinKeySize
BlowfishKeySize
BlowfishMaxKeySize
TwofishMinKeySize
TwofishKeySize
TwofishMaxKeySize
AESMinKeySize
AESKeySize
AESMaxKeySize
MD5Enabled
SHA1Enabled
XCBCEnabled
Comments
Specifies a symbolic name for the object. (Identifier)
Enable plaintext. (Default: No)
Enable DES encryption algorithm. (Default: No)
Enable 3DES encryption algorithm. (Default: No)
Enable AES encryption algorithm. (Default: No)
Enable Blowfish encryption algorithm. (Default: No)
Enable Twofish encryption algorithm. (Default: No)
Enable CAST128 encryption algorithm. (Default: No)
Enable SDT2 encryption algorithm. (Default: No)
Specifies the minimum Blowfish key size in bits. (Default: 128)
Specifies the Blowfish preferred key size in bits. (Default: 128)
Specifies the maximum Blowfish key size in bits. (Default: 448)
Specifies the minimum Twofish key size in bits. (Default: 128)
Specifies the Twofish preferred key size in bits. (Default: 128)
Specifies the maximum Twofish key size in bits. (Default: 256)
Specifies the minimum AES key size in bits. (Default: 128)
Specifies the preferred AES key size in bits. (Default: 128)
Specifies the maximum AES key size in bits. (Default: 256)
Enable MD5 integrity algorithm. (Default: No)
Enable SHA1 integrity algorithm. (Default: No)
Enable XCBC-AES integrity algorithm. (Default: No)
Text describing the current object. (Optional)
150
Chapter 3. Configuration Reference