Switching Quality Of Still Image (Quality) - Hitachi DZ-MV550A Instruction Manual

Block-like noise may appear in recorded image, or the outline of subject image is distored under the
recording conditions listed below: Pan the DVD video camera/recorder as slowly as possible. (Block
noise is likely to appear in the "STD"):
• If there is a complicated pattern in background (as in following figure on left)
• If the DVD video camera/recorder is moved excessively or quickly
• If subject is moving rapidly even when the DVD video camera/recorder is not moving
(Image when block-like noise occurs)

SWITCHING QUALITY OF STILL IMAGE (QUALITY)

You can switch the still recording quality only when using card.
It is recommended that you use "FINE" when recording vital images. (P. 30 "SIZE AND QUALITY
OF PHOTOS")
1
Press the MENU button,
choose "Quality" on the
"Record Functions
Setup" menu screen, and
then press the A
button.
2
Choose the option you want, and then press the
A button.
3
Re c o r d F u nc t i on s S e t u p
FINE
Q u a l i t y
I n p u t Sou r ce NORM
Se l f T i mer ECO
OSD Ou t p u t
ENTER RETURN
Note
The still quality setting will be stored in memory even when
the DVD video camera/recorder is turned off.
(Image without block-like noise)
Press the MENU button
to end the setting.
:
3
REM 9 9 9
8 : 0 0 AM
NORM 9 / 3 0 / 2 0 0 4
Still recording quality
97