LOCKING SCENES ON CARD (LOCK)
You can lock each photo recorded on card so that it will not be deleted or edited by mistake.
1
Set the power switch to " ".
2
Press the DISC NAVIGATION button.
3
Select the scene to be locked.
4
Press the MENU button.
5
Choose "Lock" on the "Scene" menu screen,
and then press the
6
The "Lock Set" screen will appear: If you are
sure you want to lock the selected scene,
press the
button.
7 / 19
If you want to change the scene to be locked,
you can change it on this screen.
After setting, the "Lock Set" screen will be
restored.
Repeat step 6 to lock another scene.
7
Press the
button to quit.
The lock icon " " will appear on any scene
for which lock has been set.
button.
Lock icon
●To unlock the scene
Select the locked scene, and then use the same
procedure as above to unlock the scene: The lock
icon will disappear and locking will be released.
:
Note
• If you press the MENU button before pressing the
button in step 6, the submenu screen will appear
(p. 81).
• You can also select multiple scenes (p. 76).
• When initialising the card, the locked scenes will also
be deleted.
87