Programme Overview - Miele G 7893 Operating Instructions Manual

Programme overview

Programme
Freely programmable programme : programmed by a Miele authorised service
A
technician; factory-set parameters as for UNIVERSAL programme.
CUSTOMER
For the removal of inorganic residues;
B
general analysis and water analysis and aqueous nutrients with acid-soluble
INORGANIC
metallic salts such as Ca2+, Mg2+ etc, suitable for low to medium soiling levels
and for medium to high quality rinse requirements.
For removing organic residues such as oils, fats, wax, agar. Not suitable for
C
acid-soluble residues (e.g. metallic salts, amines), for medium to high soiling
ORGANIC
levels and for medium rinse requirement. Requires liquid cleaning agent: Hot,
cold and AD water connections recommended.
Simple programme for varied soiling, not suitable for denaturing and acid-soluble
D
residues such as proteins, metallic salts and amines, for low level soiling and low
STANDARD
rinse requirements.
For the removal of organic residues such as protein, oil, certain types of grease,
E
and for certain inorganic residues (pH 7 water-soluble metallic salts). Suitable for
UNIVERSAL
preparation and analytical applications with low to medium levels of soiling and
medium quality rinse requirements.
For the removal of organic residues such as protein, oil, cell and tissue culture,
F
oils and certain types of grease (pH 7 water-soluble metallic salts). Suitable for
INTENSIVE
preparation and analytical applications with medium to high levels of soiling and
medium to high quality rinse requirements.
For temperature sensitive laboratory equipment e.g. plastic bottles (temperature
G
resistant to at least 55ºC). Suitable for preparation and analytical applications with
PLASTIC
low to medium levels of soiling and medium quality rinse requirements.
To drain soiled water from the machine, e.g. after a programme has been
cancelled. If applicable, observe regulations on containing the spread of
DRAIN
epidemics - see "To cancel a programme".
For rinsing heavily soiled items (e.g. for removing soiling or disinfectant residue,
or to prevent soiling drying on to dishes when a complete programme does not
PRE-RINSE
yet need to be run).
Complies with general hygiene regulations. 90°C (+5 °C, 0°C) programme with a
varioTD
5-minute holding time, in accordance with the requirements of EN ISO 15883-1.
For cleaning and thermal disinfection at 93°C with a 10 minute holding time, area
SPECIAL
of effectiveness A/B range, in accordance with § 18 IfSG.
93°C-10'
Programmes A to G and vario TD can be optimised to specific requirements on request by Miele Ser-
vice.
* Organic residues such as oils and fats may require conversion to oil-resistant elastomers.
** The dispensing of rinsing agent with DOS 2 must be activated by a Miele service technician.
78
Application