Buzzer - Miele G 7893 Operating Instructions Manual

Programmable functions

Buzzer

A buzzer can be programmed for the following:
– a constant tone will sound at the end of a programme,
– a buzzer will sound at one second intervals as a fault warning, and
– 3 short beeps followed by a 2 second pause, then 3 short beeps etc will sound
as a reminder to remove a test item.
The reminder to remove a test item function has to be programmed by an
approved Miele service technician.
The buzzer settings are displayed as numbers:
20
Switched off
21
At the end of a programme (factory default setting)
22 Fault indication
23
At end of a programme + fault indication
24
Reminder to remove a test item
25 At the end of a programme + reminder to remove a test item
26 Fault indication + reminder to remove a test item
27
At the end of programme + fault indication + reminder to remove a test item.
Step
Press until E04 appears.
Turn the programme selector to B.
Press repeatedly or hold pressed in until the
required number appears in the display, e.g. 26.
Value set:
The buzzer will sound at the setting selected for 30 seconds.
To switch the buzzer off early:
– turn the programme selector to
– press .
– interrupt the electricity supply, e.g. open the door.
44
,
Display / Result
E04
21
26