Programmable Functions; The Following Applies To All Programmable Functions; To Activate Programming Mode; To Save Values And Exit From Programming Mode - Miele G 7893 Operating Instructions Manual

Programmable functions

For future servicing work, please document any alterations to the factory
default settings.
Enter any alterations in the appropriate box.
General notes:
– Switch positions that have not been allocated a function are indicated in the
middle part of the display by a bar ( - ).
– The programming level is called up via the
It is shown as E.. in the display.
– When processing medical devices, any changes made to programmes or
dispensing systems must be documented in a log book kept with the machine
(in accordance with the Medical Devices Directive). The machine's cleaning
and disinfecting standards must be re-validated.

The following applies to all programmable functions:

To activate programming mode

Turn the programme selector to
Switch off the machine.
Press and hold in
same time, and, whilst doing so,
press the I-0 switch.

To save values and exit from programming mode

Press .
Press again.

To exit from programming mode without saving

Switch the machine off with the I-0
switch.
40
.
The current programme version P.. will
and at the
appear in the display. The
indicator light comes on.
SP will appear in the display.
The alteration is now saved.
The alteration will not be saved.
position.
/