LG Centric 32LT770H Commercial Mode Setup Manual page 42

42
CUSTOMIZING SETTINGS
Setting
SCREEN Customizes the PC display options in RGB mode.
(In RGB
Option
Mode Only)
Resolution
Auto Configure
Position/Size/
Phase
Reset
Basic image options
Setting
Backlight A djusts the brightness of the screen by controlling the LCD backlight. If you decrease the
brightness level, the screen becomes darker and the power consumption will be reduced
without any video signal loss.
Contrast Increases or decreases the gradient of the video signal. You may use Contrast when the
bright part of the picture is saturated.
Brightness Adjusts the base level of the signal in the picture. You may use Brightness when the dark part
of the picture is saturated.
Sharpness
Adjusts the level of crispness in the edges between the light and dark areas of the picture.
The lower the level, the softer the image.
Color Adjusts intensity of all colors.
Tint Adjusts the balance between red and green levels.
Color Temp . Set to warm to enhance hotter Colors such as red, or set to cool to make picture bluish.
Advanced Control Customizes the advanced options. Refer to the Advanced image options. (See p.43).
Picture Reset Restores the options to the default setting.
NOTE
If the 'Picture Mode' setting in the Picture menu is set to Vivid, Standard, Cinema, Sport or Game
y y
the subsequent menus will be automatically set.
You cannot adjust color and tint in the RGB-PC / HDMI-PC mode.
y y
When using the Smart Energy Saving function, the screen may look saturated in the white area of a
y y
still image.
If Energy Saving is set to Minimum, Medium, or Maximum, the Smart Energy Saving function is
y y
disabled.
Description
Selects a proper resolution. See "Customizing PC display options".
Sets to adjust the screen position, clock, and phase automatically.
The displayed image may be unstable for a few seconds while the configuration is
in progress.
Adjusts the options when the picture is not clear, especially when characters are
shaky, after the auto configuration.
Restores the options to the default setting.
Description