Removing The Freezer Door - Samsung Refrigerator User Manual

2. Insert the 2 clips in the install pack and check that
each clip holds the line fi rmly.
clip A clip A
(6.35mm) (6.35mm)
Coupler Coupler
Do not cut the water line. Gently separate it
from the coupler.

Removing the freezer door

A few things to mention fi rst.
• Make sure that you lift the door straight up so the
hinges are not bent or broken.
• Be careful not to pinch the water tubing and wire
harness on the door.
• Place doors on a protected surface to prevent
scratching or damage.
1. With the Freezer door closed, remove the upper
hinge cover using a screwdriver, and then
1
disconnect the wires by gently pulling them apart
.
2
1
- on some models - on some models
2. Remove hinge screws
3
by turning counter-clockwise, and take off the
4
upper hinge . Be careful that the door does not
5
fall on you as you are removing it.
08_ setting up 08_ setting up
clip A clip A
(6.35mm) (6.35mm)
2
and the ground screw
4
3
5
Be careful not to miss the parts of refrigerator.
3. Next, remove the door from the lower hinge
carefully lifting the door straight up
7
6
Be careful not to pinch the water tubing and
wire harness on the door.
4. Remove the lower hinge
by gently lifting the lower hinge upwards.
8
9
by
6
.
7
from the bracket
8 9