Energy Saving; Software Upgrade - Samsung Plasma TV User Manual

Energy Saving

❑
This feature adjusts the brightness of the TV in order to reduce power consumption. When watching TV at night, set the
Energy Saving mode option to High to reduce eye fatigue as well as power consumption.
Off: Turns off the energy saving function.

Low: Sets the TV to low energy saving mode.

Medium: Sets the TV to medium energy saving mode.

High: Sets the TV to high energy saving mode.

Press the TOOLS button to display Tools menu.
T
You can also set the Energy Saving option by selecting Tools → Energy Saving.

Software Upgrade

❑
To keep your product up-to-date with new Digital Television features then
software upgrades are periodically broadcast as part of the normal Television
signal. It will automatically detect these signals and display the software
upgrade banner. You are given the option to install the upgrade.
By USB

Insert a USB drive containing the firmware upgrade into TV. Please be careful
to not disconnect the power or remove the USB drive while upgrades are being
applied. The TV will turn off and turn on automatically after completing the
firmware upgrade. Please check the firmware version after the upgrades are complete. When software is upgraded, video and
audio settings you have made will return to their default (factory) settings. We recommend you write down your settings so that
you can easily reset them after the upgrade.
By Channel

Upgrades the software using the broadcasting signal.
Standby Mode Upgrade

To continue software upgrade with master power on, Select On by pressing the ▲ or ▼ button. 45 minutes after entering
standby mode, a manual upgrade is automatically conducted. Since the power of the unit is turned on internally, the screen
may be on slightly for the product. This phenomenon may continue for more than 1 hour until the software upgrade is
completed.
Alternative Software

To display the software version information.
English - 5
4 4
TV Side Panel
USB Drive