Download Print this page

Dell Precision Mobile Workstation M6700 Owner's Manual: Installing The Power Connector Port; Removing The Switch Board; Installing The Switch Board

Hide thumbs

Advertisement

Installing the Power Connector Port

1.
Insert the power-connector port in its slot and connect the power-connector cable to the system board.
2.
Install the:
a) display assembly
b) I/O board
c) palmrest
d) primary and secondary hard drive
e) optical drive
f) keyboard
g) keyboard trim
h) base cover
i)
battery
3.
Follow the procedures in

Removing the Switch Board

1.
Follow the procedures in
2.
Remove the:
a) battery
b) base cover
c) keyboard trim
d) keyboard
e) optical drive
f) primary and secondary hard drive
g) palmrest
3.
Disconnect the switch-board cable from the system board and remove it from the latches. Remove the screws that
secure the switch board to the computer and remove it from the computer.

Installing the Switch Board

1.
Align the switch board to its original position on the computer.
2.
Tighten the screws to secure the switch board to the computer.
3.
Connect the switch-board cable to the system board and secure it through the routing channel.
After Working Inside Your Computer .
Before Working Inside Your Computer .
61

Advertisement

   Also See for Dell Precision Mobile Workstation M6700

   Related Manuals for Dell Precision Mobile Workstation M6700

Comments to this Manuals

Symbols: 0
Latest comments: