Guide Bar And Saw Chain Combinations; Saw Chain Filing And File Gauges; Ec Declaration Of Conformity - Husqvarna 435 II Operator's Manual

Chain saw
Hide thumbs Also See for 435 II:
Table of Contents

Advertisement

Available languages

Available languages

Guide bar and saw chain combinations

The following cutting attachments are approved for the models Husqvarna 435 II, 435e II, 440 II and 440e II.
Length, inch
Pitch, inch
13
15
0,325
16
18
Saw chain filing and file gauges

EC Declaration of Conformity

(Applies to Europe only)
Husqvarna AB, SE-561 82 Huskvarna, Sweden, tel: +46-36-146500, declares under sole responsibility that the chain
saws for forest service Husqvarna 435 II, 435e II, 440 II and 440e II from 2013's serial numbers and onwards (the year
is clearly stated in plain text on the type plate with subsequent serial number), are in conformity with the requirements
of the COUNCIL'S DIRECTIVES:
- of May 17, 2006 "relating to machinery" 2006/42/EC
- of December 15, 2004 "relating to electromagnetic compatibility" 2004/108/EC.
- of May 8, 2000 "relating to the noise emissions in the environment" 2000/14/EC.
For information relating to noise emissions, see the Technical data chapter. The following standards have been applied:
EN ISO 12100:2010, ISO 14982:2009, EN ISO 11681-1:2011
Notified body: 0404, SMP Svensk Maskinprovning AB, Box 7035, SE-750 07 Uppsala, Sweden, has carried out EC
type examination in accordance with the machinery directive's (2006/42/EC) article 12, point 3b. The certificates for EC
type examination in accordance with annex IX, have the numbers: 0404/09/2012 - 435 II, 435e II, 440 II, 440e II.
In addition, SMP, Svensk Maskinprovning AB, Box 7035, SE-750 07 Uppsala, Sweden, has certified conformity with
annex V of the Council's Directive of May 8, 2000 "relating to the noise emissions in the environment" 2000/14/EC. The
certificates have the numbers: 01/161/075 - 435 II, 435e II, 01/161/074 - 440 II, 440e II.
The supplied chain saw conforms to the example that underwent EC type examination.
Huskvarna 8 April 2013
Bengt Frögelius, Development director chainsaw R&D (Authorized representative for Husqvarna AB and responsible for
technical documentation.)
1155355-39 Rev.2 2013-05-08
TECHNICAL DATA
Guide bar
Gauge, mm
Max. nose radius
1,3
10T
Saw chain
Length, drive links
Type
(no.)
56
64
Husqvarna H30
66
72
English – 31

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

435e ii440 ii440e ii

Table of Contents