Remote Control - Samsung COLOR TELEVISION Owner's Instructions Manual

Hide thumbs Also See for COLOR TELEVISION:
Table of Contents

Advertisement

Remote Control

(depending on the model)
Operation of remote control may be affected by bright
artificial light near to the TV.
1 1 POWER
4 4
Used to switch the TV
Used to increase or
on and off.
decrease the volume.
5 5 MENU
2 2 Numeric buttons
Used to select channels
Used to display the on-
screen menu or return to
directly.
the previous menu.
3 3 -/--
6 6 ... ... / † † / œ œ / √ √
Used to select a channel
numbered ten or over.
Used to control the
Press this button, then
cursor in the menu.
"--" symbol is
7 7 S.MENU
displayed. Enter the
Used to display the
two-digit channel
sound menu.
number.
8 8 TURBO
Used to select the turbo
sound option.
9 9 P.SIZE
Used to change the
screen size.
0 0 DUAL I-II
Used to select the
sound mode.
! ! SOURCE
Used to display all of the
available video sources.
@ @ INFO
Used to view the
channel information and
setting status you
selected.
# # PRE-CH
Used to switch
repeatedly between the
last two channels
displayed.
$ $ P
/
Used to display the next
or previous stored
channel.
% % EXIT
Used to exit from any
display or return to
normal viewing.
/
Installing Batteries
Remove the cover. Install two AAA
size batteries, then replace the
cover.
When the remote control does not
operate normally, check that the "+" and "-" ends of the
batteries are inserted correctly or the batteries are drained.
Do not mix battery types, i.e. alkaline and manganese.
^ ^ MUTE
Used to switch the
sound off temporarily. To
turn the sound back on,
press the MUTE,
, or
button.
& & ENTER
While using the on-
screen menus, press the
ENTER button to
activate (or change) a
particular item.
* * S.MODE
Used to select the
sound effect.
( ( P.MODE
Used to select the
picture effect.
) ) TV
Used to return to the TV
mode when it is in
external input mode.
a a SLEEP
Used to select a preset
time interval for
automatic turn off.
English - 2
Switching the Television On and Off
The mains lead is attached to the rear of the television.
1
Plug the mains lead into an appropriate socket.
The main voltage is indicated on the rear of the
television and the frequency is 50 or 60Hz.
2
Press the " I " button (On/Off) on the front (or side) of the
television.
3
Press the POWER button on the remote control to
switch the television on. The programme that you were
watching last is re-selected automatically. If you have
not yet stored any channels, no clear picture appears.
Refer to "Channel - Auto Store" on page 4 or "Channel -
Manual Store" on page 5.
If the television is initially powered on, several basic
customer settings proceed automatically. Refer to
"Setup - Plug & Play" on page 3.
4
To switch the television off, press the " I " button (On/Off)
on the front (or side) of the television.

Advertisement

Table of Contents
loading

Table of Contents