Listed Parts Kits And Illustrations - Whirlpool Residential Gas Water Heater Installation Instructions And Use & Care Manual

Listed Parts Kits and Illustrations

Item 12A: Pilot/Igniter-Flame Sensor assembly kit, which contains the pilot, igniter-flame sensor, and retainer clip (Natural Gas)
Item 12B: Pilot/Igniter-Flame Sensor assembly kit, which contains the pilot, igniter-flame sensor, and retainer clip (L.P. Gas)
Item 13A: Burner (Natural Gas/L.P. Gas)
Item 13B: Burner (L.P. Gas)
Item 14A: Burner assembly which contains the manifold tube, gasket, door, pilot\igniter-flame sensor assembly, manifold
component block with retainer clip, thermal switch, and pilot tube. (Natural Gas/Low Nox)
Item 14B: Burner assembly which contains the manifold tube, gasket, door, pilot\igniter-flame sensor assembly, manifold
component block with retainer clip, thermal switch, and pilot tube. (L.P. Gas)
Item 15: Contains manifold component block and retainer clip
Item 16: Contains manifold door gasket
Item 17: Contains viewport
Item #12A
32
Item #12B
Item #14A
® Registered trademark/TM Trademark of Whirlpool, U.S.A.
© 2010 Whirlpool Corporation. All rights reserved.
Manufactured under license by American Water Heater Company, Tennessee.
Warranty provided by Manufacturer.
Item #13A
Item #14B
Item #13B
L.P. BURNER