Breville BKC600XL User Manual page 12

BR9013 BKC600XL_IB_AMEND.qxp
™
continued
6. Place the K-Cup ® in the K-Cup ® Holder (located
e.
in the Brewing Chamber). Do not remove the foil
lid or puncture the K-Cup ® .
AD'. Open
and
etely. The
EW'.
omplete
® brew
2).
ater Filter
cess (page
the
ated.
O BREW'.
There are two sharp needles that puncture the
K-Cup ® . One on the underside of the Brewing
and the
for up to
Chamber Head and the other in the base of the
K-Cup ® Holder. To avoid risk of injury, do not
put your fingers in the Brewing Chamber or
K-Cup ® Holder.
conds,
nd the
ccidental
e, open
7. Lower the Safety Locking Arm to close the
owering
Brewing Chamber Head over the K-Cup ® Holder.
When closed completely, the LCD screen will
Note indicate 'READY TO BREW'. The
buttons will illuminate and the 'BREW' button will
illuminate and flash for up to 60 seconds
ate. The
oved to
gs.
wing
11/10/07 21:43 Page 11
a) The LCD screen will indicate the default brew
size (7.25 oz.). To choose a different size,
press the
Select from a stronger small cup (5.25 oz. serving),
a small mug (7.25 oz. serving), a large mug (9.25
oz. serving) or a travel mug (11.25 oz. serving).
The small mug (7.25 oz. serving) is the default
brew size. To program your favorite brew size, refer
to Setting the 'BREW SIZE' feature (page 20).
b) Once the brew size is selected, press the 'BREW'
Button. The 'BREW' button will stop flashing, the
and
LCD screen will indicate 'BREWING' and the
selected brew size.
Note
and
If the 'BREW' button is not pressed in 60 seconds,
the LCD screen will indicate 'OPEN HEAD' and the
'BREW' button will be disabled to prevent accidental
activation. To re-activate the brew sequence, open
the Brewing Chamber Head by raising and lowering
the Safety Locking Arm completely.
button to go up in size or the
button to go down in size.
buttons will no longer be lit. The
Note
Note
11