Table of Contents
Advertisement
40
Installing the hot-swappable cage
1
Detach the chassis panels and remove the air baffle.
2
Connect the following cables to the SCSI backplane board:
a
SCSI cable
b
SCSI drive power cable
c
SCSI drive fault LED cable
3
Attach the other end of these cables to the corresponding
connectors on the mainboard.
Refer to "Mainboard layout" on page 10 for the location of the
connectors.
4
Insert the hot-swappable cage into the housing (2), then tighten
the four thumbscrews to secure it to the chassis (1).
5
Reinstall the air baffle and the chassis panels.
3 Upgrading the system
Advertisement
Table of Contents
