GE SmartHome Remote Manual page 15

14
Compliance with IC Rules AND Regulations
IC: 6924A-45600
Jasco Products Company
Model: 45600
"Object is subject to the following two conditions:
(1) this device may not cause interference, and (2) this device must
accept any interference, including interference that may cause
undesired operation of the device."
• RISK OF FIRE
• RISK OF ELECTRICAL SHOCK
• RISK OF BURNS
Exercise extreme caution when using Z-Wave devices to control appliances.
Operation of the Z-Wave device may be in a different room than the controlled
appliance, also an unintentional activation may occur if the wrong button on the
remote is pressed. Z-Wave devices may automatically be powered on due to timed
event programming. Depending upon the appliance, these unattended or
unintentional operations could possibly result in a hazardous condition. For these
reasons, we recommend the following:
1. Assign Z-Wave controlled appliances to device numbers 10 – 18 on the GE remote. The
likelihood of unintentionally turning on the appliance will be reduced significantly because
the "Shift" button will need to be pressed before pressing device numbers 10-18.
2. Z-Wave devices controlling appliances should be removed from "All" control setting.
Instructions on how to do this are included in the manual for your GE remote.
3. Do Not include Z-Wave devices in Groups or Scenes if they control appliances.
4. Do Not use Z-Wave devices to control electric heaters or any other appliances which may
present a hazardous condition due to unattended or unintentional or automatic power
on control.
WARNING!