Paper Handling; Paper Input Features Summary - Xerox Phaser 6180DN Manual

Paper Handling

PAPER INPUT
Substrate (paper) handling is a core requirement of every
device. If a device cannot print a file on specific paper
desired by the user, it hardly matters how fast the print
engine is, or how many pages it can produce.
A device's paper-handling capability basically concerns
how it can handle two key criteria: the paper size and
paper weight it can feed, as well as the maximum number
of pages that can be loaded in the device's drawers, trays,
etc. The greater the paper capacity, the less time users
will spend reloading paper.
Making size adjustments to the main paper drawer is easy. However,
the paper drawer must be pulled completely out of the device in order to
load paper. While this makes loading paper easier, users must be
careful not to drop and damage the drawer.
The bypass tray supports multiple media types, including mailing labels,
thick card stock, transparencies, glossy paper and envelopes.
Copyright © 2007 MCA Internet, LLC dba BERTL.
All Rights Reserved. The license under which this document is made available and applicable law prohibit any reproduction or further transmission of any portion of this document. This
document may only be viewed electronically through the www.BERTL.com Web site and may not be stored in electronic or hard copy format. Any reproduction of trademarks is strictly
prohibited. BERTL accepts no responsibility for any inaccuracies or omissions contained in this document.
Paper Handling: Input-Features Summary
Standard Paper Capacity
Optional Paper Supplies
Maximum Paper Capacity
Maximum Paper Size
Minimum Paper Size
Maximum/Minimum Paper
Weight (bypass)
Maximum/Minimum Paper
Weight (main trays)
Maximum/Minimum Paper
Weight (duplex)
Automatically Senses Paper-
Size Changes?
Drop-In Loading of Entire Ream
of Paper?
A convenient reference chart above the bypass tray provides helpful toner
replacement information and maximum paper capacity for different media
May 2007
Xerox Phaser 6180DN
250-sheet drawer
150-sheet stack bypass
400 total sheets
550-sheet drawer
950 sheets
8.5 " x 14" (legal)
3" x 5"
17 to 40 lb. bond
40 lb. to 80 lb. cover
5.8" x 8.2" to 8.5" x 14"
17 to 32 lb.bond
40 to 60 lb. cover
Yes
No
types.
May. 18, 07
Page 17