Menu selection 7-9 also allows utilization of the Re-
mote Control Keypad for VFO and Memory control. The
front panel [ VFO ( MEM )] , [ A
CK ] , [ A
M ] , [ RCL ] , [ STO ] and [ DUAL ] keys, and VRF/
MEM CH knob are duplicated on the Remote Control
III. MAIN VFO-A C
Selection of this mode via menu selection 7-9 dupli-
cates the action of the 12-key front panel BAND key-
pad on the front panel of the MARK-V FT-1000MP.
Direct frequency entry and one-touch band change are
possible on both the Main and Sub VFOs, exactly as
on the front panel keypad.
IV. SUB VFO-B C
This function is essentially identical to "Main VFO-
A Control" as described above. However, when the
[ ENT ] key is pushed to begin direct frequency entry,
the frequency input will be applied to the Sub VFO-B
register, not the Main VFO-A register. This allows the
operator to use the transceiver's front panel keypad
for the Main VFO, and the remote keypad for the Sub
VFO, thus reducing the required keystrokes by one.
Note that, in the Sub VFO-B Control mode, push-
ing [ SUB ( CE )] then [ ENT ] does not shift frequency en-
try control to the Main VFO-A (which is the "sub" VFO
of Sub VFO-B). In this mode, frequency can only be
applied to the Sub VFO-B; there is no direct frequency
entry pathway to Main VFO-A.
MARK-V FT-1000MP Operating Manual
B ] , [ A
B ] , [ M
A ] , [ M