Positioning The Logs - Heat & Glo Grand-XTS Installation Manual

E. Positioning the Logs
If the gas logs have been factory installed they should not
need to be positioned. If the logs have been packaged
separately, refer to the following instructions.
CAUTION: Logs are fragile! Carefully remove
the logs from the packaging.
PILOT PILOT
BURNER BURNER
GRATE GRATE
LOG #1 (SRV349-701): Place log #1 in the back of the insert. Locate the legs of the log outside the 3/8" tabs to either
side of the burner. Pull the log forward until the log is stopped by the back edge of the burner.
BASEPAN BASEPAN
1 1
Heat & Glo • Supreme-XTS, Grand-XTS • 349-901 Rev. G • 9/08
Log Set Assembly: LOGS-SXT
4 4
6 6
2 2
TABS TABS
1 1
1 1
3 3
5 5
349-935 1/02
21