Advertisement
HearthStone Quality Home Heating Products Inc
4. Gently place the Middle Log (2) in
the firebox against the front of the
Rear Log. There are slots on the
underside that fit in between the
burner tube and into the burner tube
holder. The rear tabs on the Middle
Log should touch the front of the
Rear Log, and the log should be
centered as best as possible.
5. Place the Ember Screen (3) on the
front of the burner tube with the long
side of the Screen on the tube. The
short tab should be facing forward on
the bottom of the firebox.
6. Gently place the Front Log (4) in the
firebox against the front of the
burner tube. Center as best as
possible.
Gas Suppl y
Inlet
T o E q u i p m e n t
Tee Fitting
Inlet
3" MI N .
Nipple
Cap
Sediment Trap
7. Spread evenly across the Ember
Screen, the Charcoal Embers (5).
8. Gently place the Top Log (6) in the
firebox on top of the Middle Log.
The Middle Log has 2 posts, which
slide into the 2 holes on the
underside of the Top Log. The "leg"
on the Top Log points towards the
rear.
9. With logs in place, place the glass
and frame back on the firebox. Slide
the clips down securing the glass to
the firebox.
10. Grasp the cast façade and slide the
top edge under the lip of the
castings. Push the bottom of the
façade in towards the firebox. While
pushing in, pull the latch down to
secure the façade to the firebox.
29
Champlain
Model #8300
top
Advertisement
