Russell Hobbs 13897 Instructions Manual
Russell Hobbs 13897 Instructions Manual

Russell Hobbs 13897 Instructions Manual

Seattle kettle

Advertisement

Quick Links

instructions

Advertisement

Table of Contents
loading

Summary of Contents for Russell Hobbs 13897

  • Page 1 instructions...
  • Page 3: Important Safeguards

    Read the instructions and keep them safe. If you pass the kettle on, pass on the instructions too. Remove all packaging, but keep it till you know the kettle works. important safeguards Follow basic safety precautions, including: 1 This kettle must only be used by or under the supervision of a responsible adult. 2 Don’t put the kettle, stand, cable, or plug in any liquid;...
  • Page 4: Switching Off

    filling warning keep clear, steam may escape from the lid. 4 Remove the kettle from the stand. 5 Press and release the lid knob – the lid will spring open. 6 Fill with at least 2 cups of water, but not above max. 7 If you overfill, the kettle may spit boiling water.
  • Page 5: Water Filter

    descale regularly – even in soft water areas 7 Limescale may be white, coloured, even rusty-looking, but it’s normally visible. 8 Phosphate scale isn’t generally visible, but it’s there, even in soft water areas. 9 All scale causes overheating, reduces the kettle’s life, and may trigger the boil-dry cut-out.
  • Page 8 connection The product must be earthed. It has a 13A BS1362 fuse in a 13A BS1363 plug. To replace the plug, fit the green/yellow wire to E or E, the blue wire to N, and the brown wire to L. Fit the cord grip. If in doubt, call an electrician.

This manual is also suitable for:

14339

Table of Contents